|
The LP2521
Single Port PoE Injector supports PoE powered devices in
industrial environments, and delivers high power for devices
such as PTZ cameras that require power greater than the
industry-standard PoE specification. This Single Port PoE
Injector acts as a "patch panel" , taking AC power input and
providing -48 VDC to unused (non-data) wires in a standard
Category 5, 5e, or 6 Ethernet cable. The LP2521 delivers both
data and power over a single standard Ethernet cable to a PoE
Powered Device designed to receive both Data and Power through
its RJ-45 port connector.
-
Industrial
grade PoE, meets and exceeds IEEE802.3af standard
-
Temperature
type-tested for operation from -40°C to 85°C
-
Delivers up
to 28 watts, double the IEEE 802.3af standard of 14 watts
-
Supports
data links at 1000Mb (Gb), 100Mb, or 10Mb
-
Output
wattage rated for up to 28W continuously
-
LED
indicators show powering status
- Over voltage current and
short circuit protected
- Removable Power Cord with
IEC-320-C7 connector
- Data and Power carried on
the same Ethernet cable
- Ships with wall mounting
bracket (see below) --use if needed
- For Magnum PS14P PoE Power
Source Switch,
click here.
 Datasheet
|
Model. |
Price |
|
Description |
| |
|
|
|
| LP2521 |
$45 |
BUY |
Single Port High Watt Industrial PoE
Injector. For powering a single end device, provides
up to 28 watts continuously. Supports 10Mb, 100Mb or
1000Mb (Gb) Ethernet connections. Comes with wall
mount bracket. Has 90 to 264 volt auto-ranging AC power
input. Ships with removable North American power cord
with IEC-320 C7 connector. |
|
