|
The SEM2411D & SEM2411DX 1.23Mb/s 2.4GHz
10/100Mb spread spectrum industrial Ethernet Bridges in a
DIN-Rail enclosure bring wireless Ethernet to the industry.
The SEM2411D is housed in a rugged industrial case and operates
in point-to-point and point-to-multipoint modes. This
product is installed indoors and includes a wall-mount AC power supply and accepts +9VDC to
+30VDC power sources. Product includes a 2dB omnidirectional antenna. Class I Div 2 certified.
The
SEM2411DX industrial wireless radio module is normally installed outdoors on a mast,
pole or tower. It is connected to the interface module (which
looks like the SEM2411D) which is normally installed indoors or
in a protective enclosure outdoors. The two modules are
connected with a CBLAP100, CBLAP200 or CBLAP300 cable which is
not included with the SEM2411DX. These cables are 100, 200 and
300 feet long respectively. Please contact
support@lanstore.com
if you would also like to purchase the CBLAP cabling.
The SEM2411D and SEM2411DX may be used to interconnect monitoring and control
equipment over substantial distances, reliably and
cost-effectively. These 2.4GHz products feature globally
license-free operation and are FCC and ETSI certified for the 2.4
GHz industrial, scientific, and medical (ISM) band.
 2411
Datasheet
Industrial Wireless
Whitepaper
The photos below show what is
shipped with each SEM2411D (left photo) and each SEM2411DX
(right photo). Note that a 2dB omnidirectional antenna is included
with each. 
|
Model. |
Price |
|
Description |
| 2411D
Industrial Ethernet Wireless Bridge (Indoor) |
$1199 |
BUY |
SEM2411D 1.23Mb/s 2.4GHz
10/100Mb spread spectrum Industrial Ethernet Wireless Bridge
in a DIN-Rail enclosure. Shipping package includes
the radio, programming
cable, Ethernet cables (2), one is straight through and one
is crossover, a 110 vac to 9 vdc power supply, a 2 dB
omnidirectional antenna, user CD and Quick Start Guide. |
| 2411DX
Industrial Ethernet Wireless Bridge (Outdoor) |
$1499 |
BUY |
SEM2411DX 1.23Mb/s 2.4GHz
10/100Mb spread spectrum Industrial Ethernet Wireless Bridge
in a DIN-Rail enclosure. Shipping package
includes the
external radio module (the large assembly mounted on
bracket), the interface module which looks like the
SEM2411D, two Ethernet cables, one straight through and one
crossover, a programming cable, a 110 vac to 9 vdc power
supply, a 2 dB omnidirectional antenna, user CD and Quick
Start Guide. Note--CBLAP cabling for connecting the
radio module to the interface is not included. |
|
CBLAP100 Cable |
$199 |
BUY |
CBLAP100: 100 feet cabling for connecting the
radio module to the interface. For use with
2411DX Ethernet Wireless Bridges |
|
CBLAP200 Cable |
$249 |
BUY |
CBLAP200: 200 feet cabling for connecting the
radio module to the interface. For use with
2411DX Ethernet Wireless Bridges |
|
CBLAP300 Cable |
$299 |
BUY |
CBLAP300: 300 feet cabling for connecting the
radio module to the interface. For use with
2411DX Ethernet Wireless Bridges |
|
